Connex CX3300 / CX3300HP
Documentation Project
Frequency Conversion



Export Frequency Conversion



1. Remove the top cover from the unit and locate the row of 15 pins across the front of the unit. Unsolder the short jumper wire from the 7th. pin to pins 11 and 12 (connected together).
2. Unsolder the shorting solder bridge of pins 11 and 12 so that they are independent pins having no connection between them.



Connex Main Index
Radio Info Main Index
CBTricks Home Page

Copyright © 1998-2009

Disclaimer: does not warrant the accuracy of the information contained herein nor is it responsible
for any errors or omissions and assumes no liability for the content on this site.
While the uses reasonable efforts to include accurate and up to date information, makes no warranties or representations as to its accuracy
or timeliness and assumes no liability or responsibility for any errors or omissions in the Content of this site.